Hey all!
Long time user of Meteotemplate from v7. v7 ran for 5 years without any touching from me after my initial configs! How amazing is that? Well, my rain gauge got clogged up(ambient weather WS-1400IP) last week, so I decided to pull the unit down. Once I got into the unit, I decided it needed a good cleaning, so I cleaned it up real nice! The rain gauge was working, but I inadvertently killed the temp/hum sensor =p.
Oh well. I decided to go Ecowitt this time for a v18 reinstall!
current hardware:
Ecowitt GW1002 (GW1000 gateway, WS68 Wireless Solar Powered Anemometer with Light & UV Sensor, and WH40 Rain Gauge)
WH32 Outdoor Temperature and Humidity Sensor
WH57 Wireless Lightning Detection Sensor
WH41 PM2.5 Air Quality Sensor Monitor Outdoor (controversial!)
and my old Dlink-DIR-505 running meteobridge
The site is looking pretty good, but I still have some things to fix https://www.jeffersonweather.com/
Anyway, thanks for letting me in!
Hello from georgia, usa
-
Daali
- Advisor
- Posts: 56
- Joined: Mon Jul 26, 2021 8:06 pm
- Location: Georgia, US
- Station model: Ecowitt GW1002
- Software: Meteobridge, FOSHKplugin
- Contact:
Hello from georgia, usa
https://www.jeffersonweather.com
GW1000 gateway
WS68 Anemometer
WH40 Rain Gauge
WH32 Temp/Hum
WH57 Lightning
WH41 PM2.5 Air Quality
WH45 PM2.5/10/Co2 Air Quality
WN34S Soil temperature
WH31SM Soil Moisture
GW1000 gateway
WS68 Anemometer
WH40 Rain Gauge
WH32 Temp/Hum
WH57 Lightning
WH41 PM2.5 Air Quality
WH45 PM2.5/10/Co2 Air Quality
WN34S Soil temperature
WH31SM Soil Moisture