Page 1 of 1

Raspberry PI 3 + Weather Display + Meteotemplate- Need help with setup

Posted: Sat Jan 06, 2018 12:29 am
by MeteoTwischkamp
Hi guys,

I had just recently bought a Raspberry PI 3 as a replacement for my well-aged laptop. It runs with the latest raspbian version and with the latest consolewd (Console version of Weather Display specifically for the Raspberry).
In the config file there is also a meteotemplate section. There i filled in the path to where the api.php file is located, so
in my case: http://weatherfrog80.bplaced.net/template/api.php and my Meteotemplate password.

However nothing is being updated at all, the last update was at 0:35 when i closed Weather Display on my old laptop and started the Raspberry. However the clientraw files are being updated regularly, so the FTP seems to work.

Does anyone have a similiar setup and can help me?

Best Regards

Georg

Re: Raspberry PI 3 + Weather Display + Meteotemplate- Need help with setup

Posted: Sat Jan 06, 2018 4:52 pm
by jay_hoehn
This may be the reason.
Meteotemplate works or via ftp upload OR api but if you use the api, no need for ftp upload

If you want to use ftp you need to run a cron if I remember, if API, no need for cron

when you are in terminal on the PI and you launch ./wdconsole .. you see the lines popping up once running. And every x time a line with the api result (and data)

Once you close the terminal wdconsole doesn't run anymore as closing the console= killing the process

you need this to get it working without logging in : https://www.weather-watch.com/smf/index ... #msg476764
Jay

Re: Raspberry PI 3 + Weather Display + Meteotemplate- Need help with setup

Posted: Sat Jan 06, 2018 7:56 pm
by weather display
see my reply on the WD forum about the spaces you have in the config

Re: Raspberry PI 3 + Weather Display + Meteotemplate- Need help with setup

Posted: Sun Jan 07, 2018 12:27 am
by MeteoTwischkamp
Thanks guys,

The space after the "=" was indeed the issue here. Api is working now.
Incredible that such a tiny error can cause such a big malfunction. :o

Regards

Georg

Re: Raspberry PI 3 + Weather Display + Meteotemplate- Need help with setup

Posted: Sun Jul 01, 2018 11:23 am
by staccermaccer
Hello Georg,

I am Marc from Antwerp, Belgium, i see that you got your ConsoleWD working together! For some reason it is not working as it should with me. It starts up, it is collecting data and is even ftp-ing them to my site, but there are no data sent to my meteotemplate, i also have the WXSIM soft, but unfortunately that does not work with Cumulus (which i am using now), perhaps you can give me a few pointers?

A big thank you in advance from Antwerp..

Marc