New version 18.0
- Jachym
- Site Admin
- Posts: 1686
- Joined: Fri Aug 18, 2017 10:12 pm
- Location: Brno, Czech Republic
- Station model: WH1080
- Software: Meteobridge
- Contact:
New version 18.0
Hi guys,
a new version is available (18.0 Papaya). Please see the blog for more info.
a new version is available (18.0 Papaya). Please see the blog for more info.
-
- Advisor
- Posts: 72
- Joined: Thu Aug 24, 2017 11:12 am
- Location: Alabama
- Station model: Davis Pro2
- Software: WeeWX
- Contact:
Re: New version 18.0
I updated from 17.2 without any errors, however, the footnote at the bottom of the web page still shows Meteotemplate 17.2 Nectarine. I cleared my browser cache and it still shows 17.2. This happened on two different installations (different web addresses).
Tom
Tom
- LOBWX
- Forecaster
- Posts: 104
- Joined: Sun Mar 11, 2018 6:43 pm
- Location: Los Osos, CA
- Station model: Ambient WS 1401-IP
- Software: MeteoBridge
- Contact:
Re: New version 18.0
Sweet, thank you Jachym
Just BE NICE! That's all it takes to be a decent human...
-
- Newbie
- Posts: 7
- Joined: Sun Dec 03, 2017 8:07 am
- Station model: Davis Vantage Pro2
- Software: WD API
Re: New version 18.0
Updated and working smoothly. As always, updates are VERY easy.
Footnote at the bottom of the web page showing "18.0 Papaya".
Thank you Jachym!
Footnote at the bottom of the web page showing "18.0 Papaya".
Thank you Jachym!
-
- Newbie
- Posts: 7
- Joined: Sun Dec 03, 2017 8:07 am
- Station model: Davis Vantage Pro2
- Software: WD API
Re: New version 18.0
Hi again,
One issue I've seen is that the radarES block is not showing any radar info...
One issue I've seen is that the radarES block is not showing any radar info...
-
- Advisor
- Posts: 72
- Joined: Thu Aug 24, 2017 11:12 am
- Location: Alabama
- Station model: Davis Pro2
- Software: WeeWX
- Contact:
Re: New version 18.0
Jachym replied to an email I sent:
"after each update you need to go to the Main setup and click "save" even if you do not modify anything. This triggers update of the footer and several other scripts to finalize the update."
This guidance is at the very bottom of the update instructions on the blog (below the What Is New section). I only read the Update process section.
Tom
"after each update you need to go to the Main setup and click "save" even if you do not modify anything. This triggers update of the footer and several other scripts to finalize the update."
This guidance is at the very bottom of the update instructions on the blog (below the What Is New section). I only read the Update process section.
Tom
nineback wrote: ↑Wed May 06, 2020 9:19 pm I updated from 17.2 without any errors, however, the footnote at the bottom of the web page still shows Meteotemplate 17.2 Nectarine. I cleared my browser cache and it still shows 17.2. This happened on two different installations (different web addresses).
Tom
- Jolumarali
- Forecaster
- Posts: 240
- Joined: Sun Aug 20, 2017 2:06 pm
- Location: Lignerolles
- Station model: Vantage Vue
- Software: WlIP
- Contact:
Re: New version 18.0
Bonjour Jachym
Après quelques problèmes pour obtenir le Key.
Mise à jour parfaite et très rapide.
Prends soin de toi
José Luis
Après quelques problèmes pour obtenir le Key.
Mise à jour parfaite et très rapide.
Prends soin de toi
José Luis
Station météo amateur Lignerolles
OS : Windows 10 Famille
Vantage Vue
Weatherlink 2.0 (WlIP)
Meteotemplate 18.0 Papaya
https://meteo-lignerolles.fr
José Luis
- Meteopomezia
- Observer
- Posts: 22
- Joined: Wed May 29, 2019 3:44 pm
- Location: Pomezia/Italy
- Station model: Davis Pro 2
- Software: Wview
- Contact:
Re: New version 18.0
Updated smoothly
everything works great
Thanks Jachym
everything works great
Thanks Jachym
-
- Observer
- Posts: 16
- Joined: Wed Apr 15, 2020 8:49 pm
- Station model: HP2550
- Software: WU
- Contact:
Re: New version 18.0
Hello,
I want to update from version 17.2 to 18.0.
Questions :
I copy the update folder of version 18.0 instead of the update folder of version 17.2?
To launch the update I launch the file: update.php? or updateSetup.php?
Thank you.
Herve
Bonjour,
je veux mettre à jour de la version 17.2 vers 18.0.
Questions :
Je copie le dossier update de la version 18.0 à la place du dossier update de la version 17.2 ?
Pour lancer la mise à jour je lance le fichier : update.php ? ou updateSetup.php ?
Merci.
Hervé
I want to update from version 17.2 to 18.0.
Questions :
I copy the update folder of version 18.0 instead of the update folder of version 17.2?
To launch the update I launch the file: update.php? or updateSetup.php?
Thank you.
Herve
Bonjour,
je veux mettre à jour de la version 17.2 vers 18.0.
Questions :
Je copie le dossier update de la version 18.0 à la place du dossier update de la version 17.2 ?
Pour lancer la mise à jour je lance le fichier : update.php ? ou updateSetup.php ?
Merci.
Hervé
-
- Observer
- Posts: 16
- Joined: Wed Apr 15, 2020 8:49 pm
- Station model: HP2550
- Software: WU
- Contact:
Re: New version 18.0
That's what i did, but:
2 - extract the package and inside you will find a folder update_18.0
I don't have a file update_18.0 !!
2 - extract the package and inside you will find a folder update_18.0
I don't have a file update_18.0 !!
- Attachments
-
- Screenshot 2020-05-09 at 15.39.02.png (45.28 KiB) Viewed 4975 times
- Jolumarali
- Forecaster
- Posts: 240
- Joined: Sun Aug 20, 2017 2:06 pm
- Location: Lignerolles
- Station model: Vantage Vue
- Software: WlIP
- Contact:
Re: New version 18.0
Bonjour
Tu installes update 18 (dézipper) dans le dossier update
et tu ouvres avec /update/update_18.0/updateTemplate.php
Une page va s'ouvrir et en bas du devrait voir succès
Avant tu ouvres panneau de configuration de meteotemplate et termine en sauvegardant (Save).
Bonne soirée
Tu installes update 18 (dézipper) dans le dossier update
et tu ouvres avec /update/update_18.0/updateTemplate.php
Une page va s'ouvrir et en bas du devrait voir succès
Avant tu ouvres panneau de configuration de meteotemplate et termine en sauvegardant (Save).
Bonne soirée
Station météo amateur Lignerolles
OS : Windows 10 Famille
Vantage Vue
Weatherlink 2.0 (WlIP)
Meteotemplate 18.0 Papaya
https://meteo-lignerolles.fr
José Luis
-
- Observer
- Posts: 16
- Joined: Wed Apr 15, 2020 8:49 pm
- Station model: HP2550
- Software: WU
- Contact:
Re: New version 18.0
BonjourJosé Luis,
J'avais bien compris tout çà :
" Tu installes update 18 (dézipper) dans le dossier update
et tu ouvres avec /update/update_18.0/updateTemplate.php
Mais je n'ai pas de update 18 ni de updateTemplate.php dans le fichier meteotemplate_18.0.zip
Voila juste ce que j'ai dans le Zip de meteo template : un dossier update qui contient
Merci et bonne journée
Hervé
J'avais bien compris tout çà :
" Tu installes update 18 (dézipper) dans le dossier update
et tu ouvres avec /update/update_18.0/updateTemplate.php
Mais je n'ai pas de update 18 ni de updateTemplate.php dans le fichier meteotemplate_18.0.zip
Voila juste ce que j'ai dans le Zip de meteo template : un dossier update qui contient
Merci et bonne journée
Hervé
- Attachments
-
- Screenshot 2020-05-10 at 00.39.34.png (10.01 KiB) Viewed 4965 times
-
- Observer
- Posts: 16
- Joined: Wed Apr 15, 2020 8:49 pm
- Station model: HP2550
- Software: WU
- Contact:
Re: New version 18.0
Problème résolu !
En fait j'ai Meteotemplate V8 complet et non la mise à jour !
J'ai redemandé une clé à Jachym pour télécharger la mise à jour cette fois.
Hervé
meteo88.pecouba.fr
Problem solved !
In fact I have Meteotemplate V8 complete and not the update!
I asked Jachym for a key to download the update this time.
Herve
[url] meteo88.pecouba.fr
[/ url]
En fait j'ai Meteotemplate V8 complet et non la mise à jour !
J'ai redemandé une clé à Jachym pour télécharger la mise à jour cette fois.
Hervé
meteo88.pecouba.fr
Problem solved !
In fact I have Meteotemplate V8 complete and not the update!
I asked Jachym for a key to download the update this time.
Herve
[url] meteo88.pecouba.fr
[/ url]
- Jolumarali
- Forecaster
- Posts: 240
- Joined: Sun Aug 20, 2017 2:06 pm
- Location: Lignerolles
- Station model: Vantage Vue
- Software: WlIP
- Contact:
Re: New version 18.0
En fait avec un peu de retard de lecture, c'est la réponse que je voulais te donner.
Bon déconfinement.
José Luis
Bon déconfinement.
José Luis
Station météo amateur Lignerolles
OS : Windows 10 Famille
Vantage Vue
Weatherlink 2.0 (WlIP)
Meteotemplate 18.0 Papaya
https://meteo-lignerolles.fr
José Luis
-
- Observer
- Posts: 16
- Joined: Wed Apr 15, 2020 8:49 pm
- Station model: HP2550
- Software: WU
- Contact:
Re: New version 18.0
Mise à jour réussie.
Avec le bon fichier (update 18) c'est quand même mieux.
Merci pour l'aide.
Porte toi bien également.
Hervé
Avec le bon fichier (update 18) c'est quand même mieux.
Merci pour l'aide.
Porte toi bien également.
Hervé