Minimum windvalues' time?
-
- Advisor
- Posts: 89
- Joined: Fri Sep 24, 2021 10:41 pm
- Station model: Barani MeteoHelix
- Software: meteobridge
Minimum windvalues' time?
I see the max values for Wind and Gust are mentioned with the measured time below the km/h values,
but the minimum values are not showing their last measured time. I would prefer it if they would.
This is the | Avg | Max | Min | table block, but I forgot its name.
but the minimum values are not showing their last measured time. I would prefer it if they would.
This is the | Avg | Max | Min | table block, but I forgot its name.
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: Minimum windvalues' time?
Ok, I think you refer to the Station Data block. I'll add this too ( I'm already modifying the block )
-
- Advisor
- Posts: 89
- Joined: Fri Sep 24, 2021 10:41 pm
- Station model: Barani MeteoHelix
- Software: meteobridge
Re: Minimum windvalues' time?
Did you get around to adding this? I already have installed Station Data 10.4, but it's not there yet. Perhaps because enough time has not passed yet?
TIA!
Last edited by Julius on Wed Apr 27, 2022 12:04 pm, edited 1 time in total.
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: Minimum windvalues' time?
Sorry, for the delay... you can try this version:
- added wind/gust min time
- added wind/gust min time
- Attachments
-
- stationData_10.5.zip
- (9.63 KiB) Downloaded 36 times
-
- Advisor
- Posts: 89
- Joined: Fri Sep 24, 2021 10:41 pm
- Station model: Barani MeteoHelix
- Software: meteobridge
Re: Minimum windvalues' time?
Thanks! Only problem now is that it's no longer showing anything; What is the exact syntax for self coloring the speeds in block config?
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: Minimum windvalues' time?
I think you are referring to the windRose block:
- in 'speed definition' set the 'speed ranges' you want to define ( setting n values sets n+1 ranges )
- in 'define colors for each speed' set the n+1 colors ( one for each previously defined range )
- in 'speed definition' set the 'speed ranges' you want to define ( setting n values sets n+1 ranges )
- in 'define colors for each speed' set the n+1 colors ( one for each previously defined range )
-
- Advisor
- Posts: 89
- Joined: Fri Sep 24, 2021 10:41 pm
- Station model: Barani MeteoHelix
- Software: meteobridge
WindRose no longer works..
Still doesn't change the way it looks for me. Still as the image I posted before. I see no legend, no colors. Any idea what could cause this? it's being tested heredavidefa wrote: ↑Wed Apr 27, 2022 8:00 pm I think you are referring to the windRose block:
- in 'speed definition' set the 'speed ranges' you want to define ( setting n values sets n+1 ranges )
- in 'define colors for each speed' set the n+1 colors ( one for each previously defined range )
windrose3.png
windrose4.png
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: Minimum windvalues' time?
It seems correct to me... there is something I don't understand.
Please post the windRose folder zipped so I can give it a try in my test setup.
Please post the windRose folder zipped so I can give it a try in my test setup.
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: Minimum windvalues' time?
You have an old version of the dataLoader.php ( homepage/blocks/windRose/dataLoader.php ) file.
Delete it and copy the attached one.
Delete it and copy the attached one.
- Attachments
-
- dataLoader.zip
- (1.29 KiB) Downloaded 45 times
-
- Advisor
- Posts: 89
- Joined: Fri Sep 24, 2021 10:41 pm
- Station model: Barani MeteoHelix
- Software: meteobridge
Re: Minimum windvalues' time?
Wow, thanks David! Really strange, I unpacked 1.4 in the windRose dir using midnight commander, but apparently not all files got overwritten..
- Jolumarali
- Forecaster
- Posts: 240
- Joined: Sun Aug 20, 2017 2:06 pm
- Location: Lignerolles
- Station model: Vantage Vue
- Software: WlIP
- Contact:
Re: Minimum windvalues' time?
Hello David
Would you have an idea for this difference in total annual rainfall on your stationdata10.5 version?
thank you
Would you have an idea for this difference in total annual rainfall on your stationdata10.5 version?
thank you
- Attachments
-
- stationdata.jpg (67.15 KiB) Viewed 2159 times
Station météo amateur Lignerolles
OS : Windows 10 Famille
Vantage Vue
Weatherlink 2.0 (WlIP)
Meteotemplate 18.0 Papaya
https://meteo-lignerolles.fr
José Luis
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: Minimum windvalues' time?
ver 10.6
- corrected rain data truncated to int values
- corrected rain data truncated to int values
- Attachments
-
- stationData_10.6.zip
- (9.35 KiB) Downloaded 46 times
- Jolumarali
- Forecaster
- Posts: 240
- Joined: Sun Aug 20, 2017 2:06 pm
- Location: Lignerolles
- Station model: Vantage Vue
- Software: WlIP
- Contact:
Re: Minimum windvalues' time?
Perfect, thank you Davide
Station météo amateur Lignerolles
OS : Windows 10 Famille
Vantage Vue
Weatherlink 2.0 (WlIP)
Meteotemplate 18.0 Papaya
https://meteo-lignerolles.fr
José Luis