updated interactiveGraph block

[davidefa]

Update the block to include additional sensors

ver 11.4c
- sensors grouped ( differently )
- added 2 axis graphs
- added option to rename multiple sensors
- added multiple sensors graphs: PP#, SM#, ST#, T#, H#, CO2_#

ver 11.4d
Added an option to handle 'events' ( leave blank if not used )
Currently supported ( may be expanded if needed ):
raining,MM ( shows precipitation when RR>0 in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database )
windy,SS,MM ( shows wind when wind speed > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt , if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
windyG,SS,MM ( shows wind when wind gusts > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database, SS is expressed in the same unit as saved in database )

[Semtex]

Perfect !!
Grazie

[meteolopik]

Super!! Thanks a lot

[meteolopik]

T1 (extra temperature sensor 1) is not working for me, not sure if my settings are wrong. I named it T1 as in te database.

[davidefa]

Corrected visualization of external temperature and humidity.

[meteolopik]

Fixed here! Thank you so much!

[meteolopik]

Found another small bug. In extra temp the temperature does not go below 0

[davidefa]

Removed 0° minimum for external temperature

[meteolopik]

Removed 0° minimum for external temperature

Superb!!

[meteolopik]

- The dewpoint color in the temperature group stays white eventhough another color is set in the settings.
- Barometric pressure is not loading (pull from database incorrect maybe?

[davidefa]

Corrected visualization of pressure sensor and color of dew point

[meteolopik]

Corrected visualization of pressure sensor and color of dew point

Great, works as a breeze!

[meteoesine]

ciao Davide, complimenti per il tuo skill, bravo!
ti propongo una ulteriore modifica, se fattibile:
in caso di precipitazioni in corso, si potrebbe far visualizzare il grafico della pioggia? poi, quando smette di piovere, ritornare al grafico con il parametro impostato di default
(praticamente una opzione che se piove visualizza il grafico precipitazioni, se non piove, quello di default)
grazie

[davidefa]

Added an option to deal with 'events'
Currently supported ( may be expanded if needed ):
raining,MM ( shows precipitation when RR>0 in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database )
windy,SS,MM ( shows wind when wind speed > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt , if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
windyG,SS,MM ( shows wind when wind gusts > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database, SS is expressed in the same unit as saved in database )

P.S.
Today should be the right day to test it

[meteoesine]

GREAT !!!!
tnx

[davidefa]

ver 11.4f

Minor update: added the capability to show only a subset of extra sensor.
For example if you want to show only extra sensor T3 and T4 set

Code: Select all

Name of Extra Temperature sensors: 3=name3,4=name4

( settings are compatible with previous version )

ver 11.4g

Corrected a bug in wind bearing calculation ( no correction should be applied to bearing, but I applied the same correction of wind speed )

[linux150]

Thanks for your update.
I´ve a problem with showing UV. UV is on true, but not shown,,,,
I DONT HAVE A SOLAR Sensor, so i didn´t aktivate in main settings.
Now i think, maybe UV is only shown WITH Solar Sensor is activated ?!

Any solution ?

PS: How can i make the bearing graph a little bit smaller?

EDIT: I tried and switched the "Solar Sensor" to true and now uv is shown! But i dont want this settings, because Solar shows allways empty entries in other blocks or actually data...
Maybe i try to edit the php file, will take a look ...

LG
Martin

[linux150]

So i answer myself, i did by try and error, because im an absolutly newbie in programming php (but i learned a lot, installing meteotemplate )

So i copied some parts and changed the parameters so now it works ONLY with UV Sensor and NO SOLAR SENSOR for my sensor conditions.
Maybe it helps somebody with same problem ....

LG
Martin

interactiveGraph_11.4h.zip

(10.91 KiB) Downloaded 77 times

[davidefa]

ver 11.4i
Minor update: added evapotranspiration

[mchd17]

Another good block, thanks

[Laglene]

Hello Davide,
Thank you for this interactivegraph block, however a question please
How to change the color of the curves thank you
Didier

[Laglene]

Bonsoir Davide,
Désolé, la réponse est dans le nouveau block. je n'avais pas assez exploré votre travail.
Encore merci pour tout ce que vous faites.
Didier

[davidefa]

ver 11.6
- minor update to remove some nasty side effects when customGraph block is installed too
( this update is only needed if you use block customGraph )

ver 11.7
- minor update: added option to show max solar radiation ( calculated ) along measured one

[Gerrit]

Good day to you,
what a nice adjustments these are, especially the possibility to show graphs of the soil sensors, that was the only thing that kept me with another software package, which I will stop right now.

I do have a small problem, which is also with the original file, that during the loading the program temporarily freezes.

Furthermore, I have the question if there are also adjustments possible to view the history of the ground sensors, I have data from 2018 onwards.

Gerrit

[davidefa]

I'm currently working on extending The interactive and the extended graphs.
I've already updated the 'statistics' pages ( but currently didn't post the mod )
Please post a link to your site so I can take a look at the 'freezing issue'

interactive01.png (293.01 KiB) Viewed 4509 times