updated graphCombined block

[mchd17]

Props to you sir! Works like it should!

Look at the bearing graph, any way to use 0 to 360, not 0 to 500?

Just a thought.

[davidefa]

ver 2.5
- changed Y axis min/max: humidity 0-100%, bearing 0-360°


ver 2.6
- corrected Y axis min/max: humidity 0-100%, bearing 0-360°, soil moisture 0-100

( double checked, it should be ok )

[mchd17]

I don't see a change in Bearing, using 2.5 on my site

[mchd17]

Love what you done with the graphs davidefa. Look great at full width!

[mchd17]

updated to 2.6

If soil moisture is higher than 100 cbar, not showing on graph, graph is set to 0 to 100 percent. Soil moisture can go as high as 200 cbar. My soil moisture at 8" is 118cb at the present time. Are you able to go 0 to 200? And change from percent to cb?

Wind bearing works great too!!!! Thanks alot!!!!

[davidefa]

ver 2.7
- added parameters to set soil moisture max value and unit of measure ( need to rerun block setup )

[mchd17]

Nicely done!

f1d68c669c37dd95fca90ddd0fa816f5.gif (37.64 KiB) Viewed 2886 times

[drrehak]

I like all your updated blocks!
Trying to get this one to work with little success.
graphCombined V2,0 works on the page with no other graphs.
Installed the indexFull1.php from the V2.1 zip, and all the files from the V2.7 zip.
Updated the settings.
Now all I get is a blank area on the page.
Am I missing something?
Sorry I can't share a link - running on a local server and haven't setup external access.
Thanks.

[davidefa]

Let's recap ( in homepage layout you shpould call graphCombined ):
- you have installed graphCombined v2.0 run setup and it works
- you have installed graphCombined v2.7, rerun setup and it does not work ( blank area )

1) ( with v2.7 istalled ) if you run script template/homepage/blocks/graphCombined/data.php is output similar to this?

data_php.png (94.06 KiB) Viewed 2853 times

2) what is the block setup ( remove any unwanted leading/trailing blanks )
3) if you reinstall v2.0 ( without rerunning setup ) does it work?


P.S.
GraphCombinedI ( and indexFull1.php ) is a second step and needs graphCombined to be working correctly.

[lemimi]

Hello,
If it helps, I also had an empty area with version 2.7.
For this to work I just replaced the file (in graphCombined block) data.php of version 2.7 by that of version 2.0.
Thank you all for your work and the help you give us.
Michel
*************************************************************
Bonjour,
Si cela peut aider, j'avais aussi une zone vide avec la version 2.7.
Pour que cela fonctionne j'ai juste remplacé le fichier (dans bloc graphCombined) data.php de la version 2.7 par celui de la version 2.0.
Merci à tous pour votre travail et l'aide que vous nous apportez.
Michel

[drrehak]

Update/recap on what I've done.
1) install 2.0, works, inspect shows svg statements in the page for graph (see image)
2) clean install 2.7, blank page, no svg statements (see image)
3) rollback to 2.0, leave 2.7 settings, works (see image)
4) change to 2.7, use 2.0 data.php works
5) 2.7 with 2.1a data.php, no svg on the page.
didn't try other combinations.

**** forum isn't letting me add more attachments, so data.php output in next post

2.0 screen capture

gc20screen.PNG (55.93 KiB) Viewed 2844 times

2.7 screen capture

gc27screen.PNG (89.07 KiB) Viewed 2844 times

2.7 settings

gc27settings.PNG (14.03 KiB) Viewed 2844 times

[drrehak]

data.php output from 2.0

gc20dataphp.PNG (38.12 KiB) Viewed 2844 times

data.php output from 2.7

gc27dataphp.PNG (40.38 KiB) Viewed 2844 times

yes, there should be lots of 0's and null's. My meteobridge is running but still waiting to get my Davis station

Let me know if you want me to try something else.
Thanks!!!

[davidefa]

Ok, if I understand correctly, you ( both of you ) don't have any extra sensor setup so the data.php fails ( thanks to Lemimi for pointing this out ). In this case you can use the data.php of v2.0.
Later I'll post an updated version ( after verifying everything works as expected )

[drrehak]

Thanks.
Yes, no external sensors for me.

[Laglene]

Ciao Davide,
Sono felice di incontrarti sul forum.
Ho installato graphCombined versione 2.4 per ottenere sostanzialmente il colore...
Una volta installato quando apro il blocco rimane vuoto?
Qual è il problema?
Grazie in anticipo
Anno molto buono
Didier HUBERT

[davidefa]

The mods of the block I made do not work when no extra sensors are present in database.
You can try the following version ( or alternatively you may copy the data.php script from ver 2.0 ):

ver 2.9
- added RE ( rain event ), cumulated rain resets after 24h of no rain ( while R resets every midnight )
- corrected error generated when no extra sensors in database ( no alldataExtra table )

[Laglene]

Hello everyone,
Thanks Davide for your answer, now it works.
Thanks again for your quick response.
Have a good day
Didier

[TheMarcus86]

HI! how can i add evapotranspiration graph? Thank you

[davidefa]

Evapotranspiration is ET, just add ET to the list of sensors to graph ( I'll add in the block setup description )