updated meteogram block
- tobydude
- Forecaster
- Posts: 192
- Joined: Sun Jan 07, 2018 6:43 pm
- Location: Norway
- Station model: Netatmo
- Software: Weatherdiaplay
- Contact:
Re: updated meteogram block
Hi.
Great block.
Could there have been added colors of choice in "wind-line", "pressure- line", "temperature-line" and "precipitation -line"?
And the wind arrows?
Great block.
Could there have been added colors of choice in "wind-line", "pressure- line", "temperature-line" and "precipitation -line"?
And the wind arrows?
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
ver 3.3d
- added corrections of daali and meteopomezia
- added options to define color of line series
- added corrections of daali and meteopomezia
- added options to define color of line series
- Attachments
-
- meteogram_3.3d1.zip
- (756.32 KiB) Downloaded 105 times
- tobydude
- Forecaster
- Posts: 192
- Joined: Sun Jan 07, 2018 6:43 pm
- Location: Norway
- Station model: Netatmo
- Software: Weatherdiaplay
- Contact:
Re: updated meteogram block
That´s fantastic!
Thanks so much.
Thanks so much.
- Daali
- Advisor
- Posts: 56
- Joined: Mon Jul 26, 2021 8:06 pm
- Location: Georgia, US
- Station model: Ecowitt GW1002
- Software: Meteobridge, FOSHKplugin
- Contact:
Re: updated meteogram block
perfect! Thank you davidefa!
https://www.jeffersonweather.com
GW1000 gateway
WS68 Anemometer
WH40 Rain Gauge
WH32 Temp/Hum
WH57 Lightning
WH41 PM2.5 Air Quality
WH45 PM2.5/10/Co2 Air Quality
WN34S Soil temperature
WH31SM Soil Moisture
GW1000 gateway
WS68 Anemometer
WH40 Rain Gauge
WH32 Temp/Hum
WH57 Lightning
WH41 PM2.5 Air Quality
WH45 PM2.5/10/Co2 Air Quality
WN34S Soil temperature
WH31SM Soil Moisture
- LOBWX
- Forecaster
- Posts: 104
- Joined: Sun Mar 11, 2018 6:43 pm
- Location: Los Osos, CA
- Station model: Ambient WS 1401-IP
- Software: MeteoBridge
- Contact:
Re: updated meteogram block
Awesome, thanks for sharing your work.
Just BE NICE! That's all it takes to be a decent human...
- Sarrow
- Newbie
- Posts: 8
- Joined: Sun Apr 19, 2020 11:15 am
- Location: Grafton, Vermont, USA
- Station model: Davis Vantage Vue
- Software: Meteobridge
- Contact:
Re: updated meteogram block
I love meteograms and have been trying (and trying) to install the block on my site. I, too, keep getting the error "failed to load data from external source" in spite of loading each of the updated versions listed here in the Forum. I am not a coder, and I am not able to do the debugging suggested below. Any hope for us mere mortal users? I am amazed at the expertise represented here.
Thanks!
Steve
Thanks!
Steve
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
Hi Steve, please share the url of your site ( and the first parameter in the setting of the block ).
This is, for example, my setting:
This is, for example, my setting:
Code: Select all
Fano-Italy,lat=43.84&lon=13.01&altitude=12
- Sarrow
- Newbie
- Posts: 8
- Joined: Sun Apr 19, 2020 11:15 am
- Location: Grafton, Vermont, USA
- Station model: Davis Vantage Vue
- Software: Meteobridge
- Contact:
Re: updated meteogram block
David:
Thank you for the quick response!
My site: https://sarrowweather.com/template/indexDesktop.php
Block setting:
Grafton-Vermont, lat=43.17174&lon=-72.6062&altitude=256
Thank you for the quick response!
My site: https://sarrowweather.com/template/indexDesktop.php
Block setting:
Grafton-Vermont, lat=43.17174&lon=-72.6062&altitude=256
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
Try installing this version ( after installing, or after editing settings, always delete block cache via meteotemplate control panel, settings are ok )
ver 3.4
- corrected rain/pressure rounding ( imperial units )
- derived from ver 3.3d1
ver 3.4
- corrected rain/pressure rounding ( imperial units )
- derived from ver 3.3d1
- Attachments
-
- meteogram_3.4.zip
- (761.01 KiB) Downloaded 101 times
Last edited by davidefa on Tue Jan 25, 2022 8:50 am, edited 1 time in total.
- Sarrow
- Newbie
- Posts: 8
- Joined: Sun Apr 19, 2020 11:15 am
- Location: Grafton, Vermont, USA
- Station model: Davis Vantage Vue
- Software: Meteobridge
- Contact:
Re: updated meteogram block
Brilliant! That worked!
I thought that I had tried v3.4, but this time it worked.
Thank you so much for your patience!
Steve
I thought that I had tried v3.4, but this time it worked.
Thank you so much for your patience!
Steve
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
Sorry for not explaining, yes is it with colors, is derived from ver 3.3d1, it is only relevant for those using imperial units ( or for visitors selecting imperial units )
- tobydude
- Forecaster
- Posts: 192
- Joined: Sun Jan 07, 2018 6:43 pm
- Location: Norway
- Station model: Netatmo
- Software: Weatherdiaplay
- Contact:
Re: updated meteogram block
I´m using v. 3.3 that was postet earlier. Works fine with colors in metric. (European units)
Added some colors to the cloudes, too.
Added some colors to the cloudes, too.
Re: updated meteogram block
It's nice to see an updated meteogram block available. My site has not had this data for months, and I didn't know there was a solution.
I have replaced all the files in my current Meteogram folder with the ones in the Meteogram 3.3c zip file. I have updated the settings to reflect my location - details I have saved in the block settings are
Wantirna,lat=-37.860722&lon=145.238586&altitude=125
I have also cleared the cache.
However no data is being uploaded. Previously I was at least getting the place name of Wantirna.. with a Failed loading data, please try again later message - but now I am not even getting the place name to come up.
My site is www.eyesontheweather.com.au. Can anybody give me tips on what the issue might be?
I have replaced all the files in my current Meteogram folder with the ones in the Meteogram 3.3c zip file. I have updated the settings to reflect my location - details I have saved in the block settings are
Wantirna,lat=-37.860722&lon=145.238586&altitude=125
I have also cleared the cache.
However no data is being uploaded. Previously I was at least getting the place name of Wantirna.. with a Failed loading data, please try again later message - but now I am not even getting the place name to come up.
My site is www.eyesontheweather.com.au. Can anybody give me tips on what the issue might be?
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
I see you reverted to the original block. Please try ver3.4:
- copy the compressed archive in homepage/blocks
- unzip the compressed archive ( it will overwrite the files already present )
- don't rename the folder ( I mean the final folder name should be homepage/blocks/meteogram )
- rerun setup ( and clear the cache )
If it still does not work you may take a look at the 'console' ( in firefox tools -> browser tools -> web developer tool -> console ) to see if there is any useful error/warning ( or at least when the block is installed I can take a look for you )
- copy the compressed archive in homepage/blocks
- unzip the compressed archive ( it will overwrite the files already present )
- don't rename the folder ( I mean the final folder name should be homepage/blocks/meteogram )
- rerun setup ( and clear the cache )
If it still does not work you may take a look at the 'console' ( in firefox tools -> browser tools -> web developer tool -> console ) to see if there is any useful error/warning ( or at least when the block is installed I can take a look for you )
Re: updated meteogram block
Hi David,
Thanks for the prompt reply. Not sure if I have done things correctly - but here is what I did.
I unzipped V3.4 and then using FTP uploaded the directory contents. Block setup now shows the new version number and instructions, so looks like I am getting somewhere. From the file, I copied the following details for my location..
lat=-37.85&lon=145.21667&altitude=91
It seems like the block is now just 'thinking' about getting the data, but not getting it, as the wheel is just spinning next to Loading Data from external source before finally saying it cannot load the data.
I use chrome (I can't seem to gain admin access using Firefox....) and looked at console. It came up with a few errors which I have no idea what they mean.
If you can point me (or firmly direct me) in the right direction, it would be appreciated.
Thanks,
Elton
Thanks for the prompt reply. Not sure if I have done things correctly - but here is what I did.
I unzipped V3.4 and then using FTP uploaded the directory contents. Block setup now shows the new version number and instructions, so looks like I am getting somewhere. From the file, I copied the following details for my location..
lat=-37.85&lon=145.21667&altitude=91
It seems like the block is now just 'thinking' about getting the data, but not getting it, as the wheel is just spinning next to Loading Data from external source before finally saying it cannot load the data.
I use chrome (I can't seem to gain admin access using Firefox....) and looked at console. It came up with a few errors which I have no idea what they mean.
If you can point me (or firmly direct me) in the right direction, it would be appreciated.
Thanks,
Elton
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
Your configuration seems correct.
The cached data ( homepage/blocks/meteogram/cache/yrNo0.txt ) says:
Try deleting the cache again or if this does not help attach the content of the homepage/blocks/meteogram/settings.php script
The cached data ( homepage/blocks/meteogram/cache/yrNo0.txt ) says:
Code: Select all
400 Bad Request
Mandatory parameters 'lat', 'lon' missing in call to Metno::WeatherAPI::Controller::Product::try {...}
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
Only a small update, your setup should look like ( starting with a location name and a ',' after it ):
Code: Select all
Melbourne,lat=-37.85&lon=145.21667&altitude=91
Re: updated meteogram block
WOW!! I am now super happy - working as required. Thanks so much for your help. It's great to have a community of people out there who can assist those of us who don't know what we are doing!!
On a side note - I also use the summary block, but the forecast 'tab' doesn't seem to give me a forecast any more. Any ideas about this one?
On a side note - I also use the summary block, but the forecast 'tab' doesn't seem to give me a forecast any more. Any ideas about this one?
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated meteogram block
The summary blocks get the forecast from yr.no. So it needs to be updated to the new api 2.0.
Added to my todo list.
Added to my todo list.
Re: updated meteogram block
I've just noticed that there was an update to V 4.0 of this block. Once updated, the new version seems to have white see though panels on both sides of the graph (refer image link below).
Has anybody else experienced this?
https://ibb.co/mvG9R90
Has anybody else experienced this?
https://ibb.co/mvG9R90
- lemimi
- Advisor
- Posts: 86
- Joined: Wed Dec 12, 2018 3:31 pm
- Location: France - Normandie
- Station model: Brandson 304557
- Contact:
Re: updated meteogram block
Hello,
We can do this automatically via Blocks setup.
I had tested and reverted to the saved version 3.4
To the pleasure... Michel
We can do this automatically via Blocks setup.
I had tested and reverted to the saved version 3.4
To the pleasure... Michel
- tobydude
- Forecaster
- Posts: 192
- Joined: Sun Jan 07, 2018 6:43 pm
- Location: Norway
- Station model: Netatmo
- Software: Weatherdiaplay
- Contact:
Re: updated meteogram block
I´v used this version a long time and it works fine. With colors .
https://fjærvollan.no/template/indexDesktop.php
https://fjærvollan.no/template/indexDesktop.php
- Attachments
-
- meteogram_3.3d1.zip
- (756.32 KiB) Downloaded 37 times