updated interactiveGraph block
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
updated interactiveGraph block
Update the block to include additional sensors
ver 11.4c
- sensors grouped ( differently )
- added 2 axis graphs
- added option to rename multiple sensors
- added multiple sensors graphs: PP#, SM#, ST#, T#, H#, CO2_#
ver 11.4d
Added an option to handle 'events' ( leave blank if not used )
Currently supported ( may be expanded if needed ):
raining,MM ( shows precipitation when RR>0 in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database )
windy,SS,MM ( shows wind when wind speed > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt , if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
windyG,SS,MM ( shows wind when wind gusts > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
ver 11.4c
- sensors grouped ( differently )
- added 2 axis graphs
- added option to rename multiple sensors
- added multiple sensors graphs: PP#, SM#, ST#, T#, H#, CO2_#
ver 11.4d
Added an option to handle 'events' ( leave blank if not used )
Currently supported ( may be expanded if needed ):
raining,MM ( shows precipitation when RR>0 in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database )
windy,SS,MM ( shows wind when wind speed > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt , if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
windyG,SS,MM ( shows wind when wind gusts > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
- Attachments
-
- interactiveGraph_11.4d.zip
- (10 KiB) Downloaded 118 times
-
- interactiveGraph_11.4c.zip
- (9.54 KiB) Downloaded 100 times
Last edited by davidefa on Mon Apr 12, 2021 3:17 pm, edited 4 times in total.
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
Re: updated interactiveGraph block
Super!! Thanks a lot
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
Re: updated interactiveGraph block
T1 (extra temperature sensor 1) is not working for me, not sure if my settings are wrong. I named it T1 as in te database.
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
Corrected visualization of external temperature and humidity.
- Attachments
-
- interactiveGraph_11.4a.zip
- (9.52 KiB) Downloaded 88 times
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
Re: updated interactiveGraph block
Fixed here! Thank you so much!
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
Re: updated interactiveGraph block
Found another small bug. In extra temp the temperature does not go below 0
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
Removed 0° minimum for external temperature
- Attachments
-
- interactiveGraph_11.4b.zip
- (9.54 KiB) Downloaded 98 times
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
Re: updated interactiveGraph block
- The dewpoint color in the temperature group stays white eventhough another color is set in the settings.
- Barometric pressure is not loading (pull from database incorrect maybe?
- Barometric pressure is not loading (pull from database incorrect maybe?
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
Corrected visualization of pressure sensor and color of dew point
- Attachments
-
- interactiveGraph_11.4c.zip
- (9.54 KiB) Downloaded 91 times
- meteolopik
- Observer
- Posts: 26
- Joined: Tue Jun 04, 2019 11:09 am
- Location: Lopik
- Station model: Davis Pro 2 Plus
- Software: Weather Display
- Contact:
- meteoesine
- Forecaster
- Posts: 166
- Joined: Sun Aug 20, 2017 4:08 pm
- Location: Esine, Valcamonica (BS) - Italy
- Station model: Davis Pro2+
- Software: Meteobridge nano
- Contact:
Re: updated interactiveGraph block
ciao Davide, complimenti per il tuo skill, bravo!
ti propongo una ulteriore modifica, se fattibile:
in caso di precipitazioni in corso, si potrebbe far visualizzare il grafico della pioggia? poi, quando smette di piovere, ritornare al grafico con il parametro impostato di default
(praticamente una opzione che se piove visualizza il grafico precipitazioni, se non piove, quello di default)
grazie
ti propongo una ulteriore modifica, se fattibile:
in caso di precipitazioni in corso, si potrebbe far visualizzare il grafico della pioggia? poi, quando smette di piovere, ritornare al grafico con il parametro impostato di default
(praticamente una opzione che se piove visualizza il grafico precipitazioni, se non piove, quello di default)
grazie
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
Added an option to deal with 'events'
Currently supported ( may be expanded if needed ):
raining,MM ( shows precipitation when RR>0 in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database )
windy,SS,MM ( shows wind when wind speed > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt , if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
windyG,SS,MM ( shows wind when wind gusts > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
P.S.
Today should be the right day to test it
Currently supported ( may be expanded if needed ):
raining,MM ( shows precipitation when RR>0 in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database )
windy,SS,MM ( shows wind when wind speed > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt , if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
windyG,SS,MM ( shows wind when wind gusts > SS in the last MM minutes, if MM=0 uses the data from meteotemplateLive.txt, if MM>0 uses data from database, SS is expressed in the same unit as saved in database )
P.S.
Today should be the right day to test it
- Attachments
-
- interactiveGraph_11.4d.zip
- (10 KiB) Downloaded 91 times
Last edited by davidefa on Mon Apr 12, 2021 3:17 pm, edited 2 times in total.
- meteoesine
- Forecaster
- Posts: 166
- Joined: Sun Aug 20, 2017 4:08 pm
- Location: Esine, Valcamonica (BS) - Italy
- Station model: Davis Pro2+
- Software: Meteobridge nano
- Contact:
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
ver 11.4f
Minor update: added the capability to show only a subset of extra sensor.
For example if you want to show only extra sensor T3 and T4 set
( settings are compatible with previous version )
ver 11.4g
Corrected a bug in wind bearing calculation ( no correction should be applied to bearing, but I applied the same correction of wind speed )
Minor update: added the capability to show only a subset of extra sensor.
For example if you want to show only extra sensor T3 and T4 set
Code: Select all
Name of Extra Temperature sensors: 3=name3,4=name4
ver 11.4g
Corrected a bug in wind bearing calculation ( no correction should be applied to bearing, but I applied the same correction of wind speed )
- Attachments
-
- interactiveGraph_11.4g.zip
- (10.07 KiB) Downloaded 90 times
-
- interactiveGraph_11.4f.zip
- (10.24 KiB) Downloaded 88 times
-
- Observer
- Posts: 15
- Joined: Sat May 22, 2021 12:18 pm
- Station model: WMR968
- Software: SDR -> Weewx -> MT
- Contact:
Re: updated interactiveGraph block
Thanks for your update.
I´ve a problem with showing UV. UV is on true, but not shown,,,,
I DONT HAVE A SOLAR Sensor, so i didn´t aktivate in main settings.
Now i think, maybe UV is only shown WITH Solar Sensor is activated ?!
Any solution ?
PS: How can i make the bearing graph a little bit smaller?
EDIT: I tried and switched the "Solar Sensor" to true and now uv is shown! But i dont want this settings, because Solar shows allways empty entries in other blocks or actually data...
Maybe i try to edit the php file, will take a look ...
LG
Martin
I´ve a problem with showing UV. UV is on true, but not shown,,,,
I DONT HAVE A SOLAR Sensor, so i didn´t aktivate in main settings.
Now i think, maybe UV is only shown WITH Solar Sensor is activated ?!
Any solution ?
PS: How can i make the bearing graph a little bit smaller?
EDIT: I tried and switched the "Solar Sensor" to true and now uv is shown! But i dont want this settings, because Solar shows allways empty entries in other blocks or actually data...
Maybe i try to edit the php file, will take a look ...
LG
Martin
-
- Observer
- Posts: 15
- Joined: Sat May 22, 2021 12:18 pm
- Station model: WMR968
- Software: SDR -> Weewx -> MT
- Contact:
Re: updated interactiveGraph block
So i answer myself, i did by try and error, because im an absolutly newbie in programming php (but i learned a lot, installing meteotemplate )
So i copied some parts and changed the parameters so now it works ONLY with UV Sensor and NO SOLAR SENSOR for my sensor conditions.
Maybe it helps somebody with same problem ....
LG
Martin
So i copied some parts and changed the parameters so now it works ONLY with UV Sensor and NO SOLAR SENSOR for my sensor conditions.
Maybe it helps somebody with same problem ....
LG
Martin
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
ver 11.4i
Minor update: added evapotranspiration
Minor update: added evapotranspiration
- Attachments
-
- interactiveGraph_11.4i.zip
- (10.95 KiB) Downloaded 62 times
-
- Observer
- Posts: 30
- Joined: Thu Nov 04, 2021 4:44 pm
- Location: Galargues 34
- Station model: Davis pro 2
- Software: Weatherlink
- Contact:
Re: updated interactiveGraph block
Hello Davide,
Thank you for this interactivegraph block, however a question please
How to change the color of the curves thank you
Didier
Thank you for this interactivegraph block, however a question please
How to change the color of the curves thank you
Didier
-
- Observer
- Posts: 30
- Joined: Thu Nov 04, 2021 4:44 pm
- Location: Galargues 34
- Station model: Davis pro 2
- Software: Weatherlink
- Contact:
Re: updated interactiveGraph block
Bonsoir Davide,
Désolé, la réponse est dans le nouveau block. je n'avais pas assez exploré votre travail.
Encore merci pour tout ce que vous faites.
Didier
Désolé, la réponse est dans le nouveau block. je n'avais pas assez exploré votre travail.
Encore merci pour tout ce que vous faites.
Didier
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
ver 11.6
- minor update to remove some nasty side effects when customGraph block is installed too
( this update is only needed if you use block customGraph )
ver 11.7
- minor update: added option to show max solar radiation ( calculated ) along measured one
- minor update to remove some nasty side effects when customGraph block is installed too
( this update is only needed if you use block customGraph )
ver 11.7
- minor update: added option to show max solar radiation ( calculated ) along measured one
- Attachments
-
- interactiveGraph_11.7a.zip
- (11.17 KiB) Downloaded 77 times
-
- interactiveGraph_11.6.zip
- (10.91 KiB) Downloaded 55 times
-
- Observer
- Posts: 39
- Joined: Wed Feb 06, 2019 1:31 pm
- Station model: Vantage pro 2 plus
- Software: Meteobridge
- Contact:
Re: updated interactiveGraph block
Good day to you,
what a nice adjustments these are, especially the possibility to show graphs of the soil sensors, that was the only thing that kept me with another software package, which I will stop right now.
I do have a small problem, which is also with the original file, that during the loading the program temporarily freezes.
Furthermore, I have the question if there are also adjustments possible to view the history of the ground sensors, I have data from 2018 onwards.
Gerrit
what a nice adjustments these are, especially the possibility to show graphs of the soil sensors, that was the only thing that kept me with another software package, which I will stop right now.
I do have a small problem, which is also with the original file, that during the loading the program temporarily freezes.
Furthermore, I have the question if there are also adjustments possible to view the history of the ground sensors, I have data from 2018 onwards.
Gerrit
-
- Expert
- Posts: 862
- Joined: Tue Jan 12, 2021 8:03 am
- Location: Italy
- Station model: WH2650
- Software: WH2650 (direct upload)
- Contact:
Re: updated interactiveGraph block
I'm currently working on extending The interactive and the extended graphs.
I've already updated the 'statistics' pages ( but currently didn't post the mod )
Please post a link to your site so I can take a look at the 'freezing issue'
I've already updated the 'statistics' pages ( but currently didn't post the mod )
Please post a link to your site so I can take a look at the 'freezing issue'