Gaugus are not correct

Post Reply
pd3lkn
Observer
Observer
Posts: 15
Joined: Sat Sep 11, 2021 10:46 am
Location: Amsterdam
Station model: ws4000
Software: cumulus
Contact:

Gaugus are not correct

Post by pd3lkn » Sun Dec 12, 2021 9:28 pm

hi all i'm upgradet from cumulus to weather display but the wind speed an rain gauges are not responding in the template
when i look at the wather display screen its reeds te correct speedin KMh and rain into mm but into the template gauges its stays at 0.0
can anny one help me to solve this please ?

see my meteotemplate at : www.pd3lkn.nl

greetings Eric

davidefa
Expert
Expert
Posts: 862
Joined: Tue Jan 12, 2021 8:03 am
Location: Italy
Station model: WH2650
Software: WH2650 (direct upload)
Contact:

Re: Gaugus are not correct

Post by davidefa » Sun Dec 12, 2021 10:14 pm

Check the main setup, adjustments section, the 'Daily precipitation' and 'Wind speed' parameters should be 1 ( or something like that ) but not 0, as these are multiplicative parameters.

limits.png
limits.png (100.98 KiB) Viewed 2821 times

I noticed that your graphics are a little bit weird ( for example the temperature one has a lot of 'square wave' noise superimposed )

temp1.png
temp1.png (211.76 KiB) Viewed 2821 times
Image

pd3lkn
Observer
Observer
Posts: 15
Joined: Sat Sep 11, 2021 10:46 am
Location: Amsterdam
Station model: ws4000
Software: cumulus
Contact:

Re: Gaugus are not correct

Post by pd3lkn » Mon Dec 13, 2021 10:13 am

Thanks that was the trick
now the only thing i have to figure out is the wind gauge compass is giving the wrong direction when it is South its pointing to the SW so its a view degrees off

Post Reply