Meteotemplate Forum

in the process of setting up the template, so far its working with the old weatherstation (Davis WM 2 - need new cables...).
I also have a 'air quality monitoring station' (uradmonitor A3-sensors for Gamma radiation, formaldehyde, CO2, VOC Air quality, temperature, barometric pressure, air humidity, PM2.5 particulate matter).
The unit can output the data on a local ip in json format.

Is there a way to put this data into the database and template ?

(old) weatherstation : http://weer.on1gl.be
air quality : http://air.on1gl.be

I got the same device and made a script to display the JSON data (see my signature). At this moment it's just that. I also would like to store the data in a database and make graphs out of data. It doesn't have to be in the Meteotemplate database (for me).

glad i'm not alone
You got already a good start in displaying the data....
Any database will do, still having space on the NAS....

I made a script to store the data in a database and display them under the current readings. So if you click 'more' you will see the graphs.
It works with a cron job on my NAS. It takes the data from the JSON stream and puts them in a database.
It's not perfect, but it works.

You can check it out on my site.

Fan-Tas-Tic

Do you have a link to the sensor you are using?

I was looking at the Purple Air Sensor, but it does not do Ozone.

Bob

take a look at this website, there are different models, the A3 is in use here

https://www.uradmonitor.com/products/?sel=4

73
Luc

At this moment there is a Campaign at Indiegogo for funding the new version.

https://www.indiegogo.com/projects/air- ... -network#/